Kenwood NX-3000 Serie Guia Del Usuario página 9

CAUTION
Do not disassemble or modify the transceiver for any reason.
●
Do not place the transceiver on or near airbag equipment while the
●
vehicle is running. When the airbag inflates, the transceiver may be
ejected and strike the driver or passengers.
Do not transmit while touching the antenna terminal or if any metallic
●
parts are exposed from the antenna covering. Transmitting at such
a time may result in a high-frequency burn.
If an abnormal odor or smoke is detected coming from the
●
transceiver, switch the transceiver power off immediately, remove
the battery pack from the transceiver, and contact your KENWOOD
dealer.
Use of the transceiver while you are driving may be against traffic
●
laws. Please check and observe the vehicle regulations in your
area.
Do not expose the transceiver to extremely hot or cold conditions.
●
Do not carry the battery pack (or battery case) with metal objects,
●
as they may short the battery terminals.
Danger of explosion if the battery is incorrectly replaced; replace
●
only with the same type.
When attaching a commercial strap to the transceiver, ensure that
●
the strap is durable. In addition, do not swing the transceiver around
by the strap; you may inadvertently strike and injure another person
with the transceiver.
If a commercially available neck strap is used, take care not to let
●
the strap get caught on nearby machine.
When operating the transceiver in areas where the air is dry, it is
●
easy to build up an electric charge (static electricity). When using
an earphone accessory in such conditions, it is possible for the
transceiver to send an electric shock through the earphone and to
your ear. We recommend you use only a speaker/microphone in
these conditions, to avoid electric shocks.
Do not expose the transceiver to long periods of direct sunlight, nor
●
place it near heating appliances.
7