Safety Devices; Safety And Information Signs - Angelo Po 0N0VT1W Manual De Uso

Although the appliance is complete with all
safety devices, during installation and con-
nection additional devices must be added if
necessary to comply with the relevant legal
requirements.
Pan recognition device: cuts out the cook-
A)
ing zone if no pan is peasant or if the pan is
empty.
Temperature sensor: cuts out the cooking
B)
zone if the temperature is too high. Once the
problem has been resolved and the tem-
perature has returned to normal, operation is
automatically restored.
Cooling fan: reduces the temperature of com-
C)
ponents if they overheat.
The illustration shows the position of the signs
provided.
Nameplate with manufacturer and
A)
appliance data.
General hazard: read the manual carefully
B)
before carrying out any procedure.
General hazard: When washing the appli-
C)
ance do not point pressurised water jets at
internal parts.
General hazard: all relevant regulations
D)
must be complied with. "Install in compli-
ance with the relevant regulations and use in
well ventilated premises only".
General hazard: all relevant regulations
E)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions".
Burn hazard: watch out for hot surfaces.
F)
CE marking: this indicates that the equipment
G)
is compliant with all relevant laws applicable to
the product.
WEEE Symbol: indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
3301370_ut_GB_rev.1

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

- 5 -
Important
The cooling fan operates even if the control
knob is turned off (pos."0") until the temper-
ature returns to normal levels.
Note: All safety devices are located inside the
induction module and are therefore not visible
from the outside.
E
D
F
37M3202
C B
G
A
H
ENGLISH
GB