BABYTREND JG64 Manual De Instrucciones página 8

SAFETY
• Carefully place the child in the stroller
seat and bring the safety harness
around the child's waist and over the
shoulders. Place the crotch strap
between the child's legs. Insert the
male end of each shoulder/waist belt
into the buckle on the crotch strap.
Tighten the harness to be snug around
the child's waist and over the child's
shoulders (Fig. 17b).
TO RELEASE THE CHILD
Type 1
18) • To release, push Red Button on Center
Clasp, the two Harness Buckles will
pop free (Fig. 18).
Type 2
19) • To release, apply pressure to both
sides of each male clip until the clip
is released (Fig. 19). This process
requires a moderate amount of effort so
as to prevent an accidental release by
your child.
13
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
Type 1
Adjust for a snug fit
Fig. 17b
Type 2
Shoulder Stap
Squeeze
Waist Strap
Crotch Strap Adjust for a snug fit
Fig. 17b
Type 1
Center Clasp
Fig. 18
Type /Tipo/Type 2
Fig. 19
SEATBACK POSITIONING
20) • The seat has a multiple position recline
that is controlled by a strap and buckle
assembly behind the seat (Fig. 20a).
To recline the seat, loosen the strap
through the buckle and adjust to the
required recline position (Fig. 20b). To
place the seat back in a more upright
position, press upward on the seat back
with one hand while pulling the strap
through the buckle with the other. The
strap will lock automatically.
The upright position should be
used only for a child that is at least
6 months old. Always re-adjust
the safety harness, including the
shoulder belts, when repositioning
the seatback.
Copyright © 2016, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
SAFETY
Fig. 20a
Fig. 20b
14