Power Supply; External Power Supply - Winkhaus blueMotion Instrucciones De Montaje

Installation, Operating and
Maintenance Instructions

Power supply

External power supply

Notice: The Winkhaus power supply 24 V DC is designed for the
operation with Winkhaus locks. In addition, small consumers
(e.g. fingerprint in the door element) can be supplied with
this power supply - up to on additional power requirement of
max. 0.5 A and the voltage requirement must match the power
supply (24 V DC).
Notice: Operation of a second blueMotion with the same power
supply is not possible. A separate power supply must be used
for each lock.
If you do not use the Winkhaus power supply unit, please keep
in mind the following information:
• Power supply 24 V DC (stabilized)
• min. 1,5 A continuous current (min. 2 A peak current)
• min. 36 W
Aug. Winkhaus GmbH & Co. KG ∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
Power supply unit for blueMotion 100 - 240 V,
50 / 60 Hz, 24 V DC / 2,5 A, mounting on DIN rail,
includes connection diagram
T-HT NETZTEIL 24 V DC / 2,5 A
25 5044745
2126934
EN
2