Inglesina Amerigo HSA Ifix Manual De Instrucciones página 34

WARRANTY / SPARE PARTS
Do not use spare parts or accessories not supplied and/or in any case
not approved by L'Inglesina Baby.
Any damage caused by the use of accessories not supplied and/or
not approved by L'Inglesina Baby, shall be excluded from our terms
of warranty.
Never modify and tamper with the mechanical components of the
Amerigo HSA Ifix car seat; there is the risk that a safe hooking of the
same cannot be assured thereafter.
Any modification to the products relieves L'Inglesina Baby from any
responsibility whatsoever.
Do not remove any adhesive or sewed labels; this may jeopardize
the compliance of the product with regulation requirements in force.
Regularly inspect all safety devices to ensure perfect product
functionality along the time. In case of problems and/or malfunctions
of any kind do not use the product. In this event, contact an
Authorized Retailer or Inglesina Customer Care Service promptly.
L'Inglesina Baby S.p.A. declines all liability for any damages to
property or people resulting from the improper and/or incorrect use
of the product.
In order to improve its products, L'Inglesina Baby S.p.A. reserves the
right to update and/or modify any and all aesthetic-technical details
without prior notice.
Never use the child seat without the padding. This padding cannot
be replaced with other paddings unapproved by the manufacturer
as it is a system component.
When acting on the mobile parts of the device always pay careful
attention to your child's safety.
The child seats could leave traces on the car seats, due to the measures
taken to install it firmly in compliance with safety standards. This
product was designed to minimise this effect as much as possible.
The manufacturer cannot be considered liable for eventual traces
deriving from normal use of the child car seat.
HINTS FOR CLEANING AND MAINTAINING THE PRODUCT
Never force any mechanisms or moving parts; in case of doubt, check
the instruction first.
Store the product in a dry place.
Protect the product against atmospheric agents, water, rain or snow;
moreover, continuous and prolonged exposure to sunlight may
cause changes in the colour of many materials.
Clean the plastic and metal parts with a wet cloth or with a mild
detergent; do not use solvents, ammonia or benzine.
Carefully dry metal parts after any contact with water in order to
avoid the formation of rust.
It is recommended to wash the lining separately from other items.
Periodically revive the fabric parts using a soft brush for garments.
Respect the washing regulations for the textile lining born on the
suitable labels.
34
WARNING