GENERAL INFORMATION
Supply and safe-keeping
The manual is supplied in printed format.
Keep this manual safe, with the stove, so that the user can consult it easily.
The manual is an integral part, for safety reasons, therefore:
•
it must be kept intact (in full). If it gets lost or ruined it is necessary to immediately ask for a new copy:
•
it must be kept with the stove until demolition (including relocation, sale, rental, lease, etc....).
The Manufacturer will not be held liable for improper use of the stove and/or damage caused by operations that are not set forth in
the technical documentation.
Language
The original manual was written in Italian.
Any translations into additional languages must be carried out based on the original instructions.
The Manufacturer is liable for the information contained in the original instructions; the translations into different languages cannot be
fully verified therefore if any inconsistency arises it will be necessary to follow the text in the original language or contact our Technical
Documentation Office.
Symbols used in the manual
symbol
! IMPORTANT
SAFETY MEASURES
General safety warnings
! IMPORTANT
Stove installation, system verification, operation verification and initial calibration must be carried out exclu-
sively by qualified and authorised staff.
The stove needs to be connected to a single chimney that guarantees the draught declared by the Manufacturer
and observes the installation regulations that apply to the installation site.
The room where the stove is installed must have an air intake.
The stove must not be used as an incinerator or differently from its purpose
Do not use any fuel other than fire pellet. It is strictly forbidden to use liquid fuels.
It is prohibited to use the stove with the door or ash drawer open or the glass broken.
Do not touch the hot surfaces of the stove without suitable protective equipment, to avoid getting burned. When
it is running, the outer surfaces reach hot temperatures to the touch.
It is forbidden to make unauthorised changes to the stove.
Before using the stove it is necessary to know the position and function of the controls.
If the chimney catches fire you must call the fire brigade.
Only use original spare parts. Any tampering and/or replacements that have not been authorised by Ravelli can
pose a danger to the user's safety.
In the event of particularly adverse weather conditions, the safety systems could intervene and switch off the
stove.In any case, doe not disable the safety systems.
Use and maintenance manual HRB 150 - HRB 200
definition
This symbol is used to identify particularly important information in the manual. This
information also concerns the safety of users involved in using the stove.
Read this instructions manual carefully before stove installation and use. Failure to
observe the instructions set forth herein can void the warranty and/or cause damage to
property and/or people.
Rev.1 14/02/18
Page 39
EN