Service And Maintenance; Warranty - Altrad Belle MEGAVIB+ Manual Del Operador

GB
The Belle Group Megavib+ is designed to give many years of trouble free operation. It is, however, important that the simple regular
maintenance listed in this section is carried out.
It is recommended that an approved Belle Group dealer carries out all major maintenance and repairs. Always use genuine Belle Group
replacement parts, the use of spurious parts may void your warranty.
Periodic Maintenance
1. Only a quali¿ ed electrician should work on the electrical parts.
2. Make sure that the electricity is switched off before conducting any maintenance work.
3. In all maintenance operations, original parts will be used.
4. Periodic lubrication of the convertor's bearings is not necessary.
5. Every 100 hours carbon brushes should be inspected. They should be changed if effective length is under 5 mm.
6. Periodically, clean the ventilation vents in the front and back part of the converter to avoid overheating.
7. After maintenance, ensure all safety devices are assembled correctly.
8. Before operating, inspect the housing's holding bolts.
9. Every 12 months or more frequently, depending on the usage conditions, its recommended a inspection be done by an
authorised Belle Group dealer.
GB
Your new Belle Group 'Megavib+' is warranted to the original purchaser for a period of one-year (12 months) from the original date of
purchase. The Belle Group warranty is against defects in design, materials and workmanship.
The following are not covered under the Belle Group warranty:
1. Damage caused by abuse, misuse, dropping or other similar damage caused by or as a result of failure to follow assembly,
operation or user maintenance instructions.
2. Alterations, additions or repairs carried out by persons other than Belle Group or their recognised agents.
3. Transportation or shipment costs to and from Belle Group or their recognised agents, for repair or assessment against a
warranty claim, on any machine.
4. Materials and/or labour costs to renew, repair or replace components due to fair wear and tear.
The following components are not covered by warranty.
· Drivebelt/s
· Engine air ¿ lter
· Engine spark plug
Belle Group and/or their recognised agents, directors, employees or insurers will
not be held liable for consequential or other damages, losses or expenses in
connection with or by reason of or the inability to use the machine for any purpose.
Warranty Claims
All warranty claims should ¿ rstly be directed to Belle Group, either by telephone, by Fax, by Email, or in writing.
For warranty claims:
Tel: +44 (0)1538 380000 Fax: +44 (0)1538 380038
Email : Warranty@belle-group.co.uk
Write to:
Belle Group Warranty Department,
Unit 5, Bode Business Park,
Ball Haye Green,
Leek,
Staffordshire ST13 6BW
England.
Service & Maintenance

Warranty

10