Technical Data; Paper Shredder Securio P44 - HSM SECURIO P 44 Instrucciones De Servicio

Check that the door switch is working properly:
Warning!
If the following procedure cannot be
performed, switch off the document
shredder, disconnect the mains plug
and contact customer service.
• Insert the mains plug and switch on the shredder.
• Feed in a sheet of paper and open the front door
while the paper is being drawn in.
 The cutting unit must turn off immediately and the
"door open" indicator must light up.
• Close the door.

Technical data

Cutting type
Shred size (mm)
Sa fe ty ra ting DIN 32757 – 1
Cutting ca pa ci ty (sheets), DIN A4
Cutting speed
Lo ading width
Voltage
Power for the maximum number of sheets
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Dimensions W x D x H (mm)
Weight
Volume of the shredded paper container
Sound pressure level emissions
* HSM-specifi cation
EC declaration of conformity
The manufacturer HSM GmbH + Co. KG, Austrasse 1 - 9, D-88699 Frickingen hereby declares that the machine,
referred to here as
document shredder Securio P44
corresponds to the health and safety requirements of the following EC directives listed below due to its conception and
design of the version in which it was put into circulation by us:
Machinery directive 2006 / 42 / EC
Applied standards and technical specifi cations:
• EN 55014-1:2006
• EN 61000-3-2:2006
• EN 61000-3-3:1995 + A1:2001 + A2:2005
• EN 55014-2:1997 + A1:2001
• EN 13849-1
• EN 60950-1:2006
Authorised represenatative for the compilation of technical documentation:
Rolf Gasteier, HSM GmbH + Co. KG
Frickingen, 01.04.2010
Rolf Gasteier - Technical Director
14
 The cutting unit must not yet restart.
• Pull the paper out of the feed opening. The light
barrier must be clear.
• Switch off the machine and then switch back on.
 The cutting unit starts when paper is fed in.
Accessories:
• 25 waste bags, order no. 1.452.995.000
• Special cutting apparatus oil (250 ml)
order no. 1.235.997.403
Strip cut
5.8
2
70 g/m 2 76 - 78
80 g/m 70 - 72
2
EMC directive 2004 / 108 / EC
• EN 61000-4-2:1995 + A1:1998 + A2:2001
• EN 61000-4-4:1995 + A1:2001 + A2:2001
• EN 61000-4-5:1995 + A1:2001
• EN 61000-4-6:1996 + A1:2001
• EN 61000-4-11:1994 + A1:2001
3.9 3.9 x 50
2 3
61 - 63 43 - 46
56 - 58 39 - 41
100 mm/s
400 mm
230 V, 50 Hz
2 600 W
-10 °C to +40 °C
max. 90 %, without condensation
max. 2,000 m
700 x 592 x 1025
ca. 108 kg
205 l
< 70 dB(A)
Cross cut
1.9 x 15 1 x 5
4 Level 6*
28 - 30 12
23 - 25 10
1004