Auto Ranging; Average - Dickey-John MINI GAC AND Manual Del Operador

OPERATOR'S MANUAL
®
mini GAC
11001-1464 Rev C

AUTO RANGING

Auto Ranging is an automatic feature that occurs when grain
tests out of the calibration limits (high or low) for the current grain
selection. If a product tests out of the moisture range of the
selected product, the mini GAC will look for a higher or lower
grain calibration and give the option to choose the correct
calibration. This typically occurs with corn.
A screen will automatically display to re-test the grain at the
correct calibration values
to the correct grain selection eliminating the need to dump the
grain and start a new test. All proceeding products will be tested
to the last grain selection unless the product tests out of that
range.
1. Press Enter at the Auto Range display to switch to the high
or low grain selection.
2.
Press On/Off/Home button to reject the analysis
Figure 16
Auto Ranging

AVERAGE

Grain Test Results
The Average menu allows test results to be added, read, or
cleared from the unit. Up to 10 values can be stored for each
grain. If all memory indicators are full when adding new test
results, the test results in location 1 will be replaced with the new
test results. The factory default setting is 3 values (refer to
(Figure 17).
IMPORTANT: Changing the language will reset the
memory and all saved grain tests
results will be cleared.
(Figure 16). The new test will be saved
Corn
Corn Hi
NORMAL OPERATION / 19
.