Battery; Switchpad Functions - Dickey-John MINI GAC AND Manual Del Operador

OPERATOR'S MANUAL
Low Battery
Dead battery
on/off
home
Enter button
UP
DOWN
®
mini GAC
11001-1464 Rev C

BATTERY

A 9V lithium battery is installed in the unit. A low battery
voltage menu will appear when battery life has almost reached
capacity. The unit is still capable of making accurate
measurements, but the battery should be replaced soon.
A dead battery warning displays when the battery has reached
its end of life and is no longer capable of making accurate
measurements. The unit will no longer perform any functions
other than to power off the device. If a dead battery warning
displays prior to saving some settings, the information could
potentially be lost.
Battery life can be prolonged by reducing the Power Down
setting of inactivity. The power down setting range is selectable
from 10 to 90 seconds. The default setting is 90 seconds.
IMPORTANT: Follow your local government regulations on
disposal and recycling of lithium batteries.

SWITCHPAD FUNCTIONS

ON/OFF/HOME
The On/Off/Home button is pressed momentarily to power the
unit On and held for 2 seconds to power the unit Off.
Pressing the Home button on any page will discard any changes
and return to the Home menu.
ENTER
The Enter button is pressed to start a measurement from the
Home menu. The Enter button is also used to make a menu
selection, and if applicable, save the selection and return to the
Home menu.
UP AND DOWN ARROW BUTTONS
The Up and Down Arrow buttons are used to scroll through the
items on the menu.
(Figure 3) illustrates the Switchpad area.
INTRODUCTION / 3