Linea 2000 DOMO DO926BFK Manual De Instrucciones página 51

5� Install the lower door and take care of its alignment with the appliance body�
8� Move the hinge to another side of the box after removing the screws on the hinge;
6� Tighten the screws of the middle hinge on the reversible side�
www.domo-elektro.be
Use screws to fasten�
7� Install the top door and remove the existing top door block� Install a new top door block
7. Position the upper door. Remove the door stop. Place a new doorstop and fasten it
(not the same one) on the reversible side� Screw it down�
with the screw.
8. Position the hinge of the upper door, fasten it with the screw and replace the cover
8� Move the hinge to another side of the box after removing the screws on the hinge;
9� Install the hinge cover after fastening the hinge�
plate.
Use screws to fasten�
9. With the door closed, check whether the door is aligned horizontally as well as
9� Install the hinge cover after fastening the hinge�
vertically and that the seal closes on all sides before you tighten the upper hinge
completely. If necessary, adjust the adjustable feet.
TROUBLE SHOOTING
Frequently, a problem is minor and a service call may not be necessary, use this
trouble shooting guide for a possible solution.
1. Does not work
Check connection of power cord to power source.
Plug in unit
Use proper voltage.
2. Cools too frequently
Check temperature setting and adjust as needed.
Close door securely.
Be sure that food is cool before inserting.
Do not keep door open for too long and MINIMIZE door openings.
Do not place unit close to heat sources Or direct sunlight.
3. Intemal temperature not cold enough
Check connection of power cord to Power source.
Plug in unit
51
DO926BFK
GB
11
11