Temperatur - Elektor D 052M Instrucciones De Servicio

GB IRL
Contents
1 Technical data
2 Safety
3 Installation
4 Operation
5 Maintenance
6 Spare parts list
7 EC Manufacturer Declaration
This instruction manual must be accessible to the operating
personnel at any time. The present instruction manual has to
be read carefully before installation or starting operation of the
blower.
Subject to modifications. In case of doubt clarification with the
manufacturer is required.
This document is protected by copyright. It is not to be made
accessible to third parties without our explicit written consent.
Any form of duplication or recording and storage in electronic
equipment is forbidden.
1 Technical data
The following data apply to the standard version. Your blower
may differ from these data (see «rating plate»).
D 052M
Volumetric flow rate
15,0 18,0 13,5 12,5 22,0 24,5 22,0 22,5
[m 3 /min]
Total pressure
530 760
difference [Pa]
Max. permitted
3000 3600 3000 3600 3000 3600 3000 3600
blower speed [rpm]
Motor speed
2840 3350 2805 3365 2840 3340 2820 3360
[rpm]
Voltage
208–265 208–290
[V]
360–460 360–500
Frequency
50 60
[Hz]
Current con-
1,25–2,15 1,73–1,91
sumption [A]
0,72–1,24 1,00–1,10
Motor output
0,37 0,44 0,25 0,30 0,55 0,90 0,55 0,75
[kW]
Operating capacitor
– –
[µF/ V]
Weight
6,4 6,4
[kg]
Rating plate
Details of electrical data can be found on the rating plate,
which also includes the model identification number and serial
number which are required for the ordering of spare parts.
Special versions
With temperature barrier: Conveyed medium up to max. +180° C.
6
E 052 D 060M E 060
530 760 730 1040 730 1040
208–265 208–290
230 230 230 230
360–460 360–500
50 60 50 60 50
2,40–3,30 3,45–3,20
1,8 2,2 3,6 5,0
1,40–1,90 2,00–1,83
12/ 12/ 16/ 16/
– –
450 450 450 450
6,4 6,4 9,6 10,6 11,1 11,1
2 Safety
Our blowers excel by a high degree of operating safety. As
the blowers are rather high-powered machines, the safety in-
structions must be strictly adhered to in order to avoid injuries,
damage to objects and to the machine itself.
2.1 Suction effect
The blowers produce a powerful suction effect.
Warning!
Objects, items of clothing and also hair can be
sucked into the intake port.
Danger of injury.
Do not stand near the intake opening during opera-
tion. The wire guards on the intake ports may only
be removed if hoses or pipes of at least 1m in
length are connected instead. Never operate the
blower with open intake port (danger of injury from
the impeller).
2.2 Blowing effect
Warning!
Powerful blow-out at the discharge flange. Sucked-
in objects may be ejected at very high speed
(danger of injury).
Blowers are meant for conveying clean air only. The
sucking-in of solid particles and other contaminants
– which might be discharged – must be avoided at
all times. These objects have to be withheld before
entering into the blower by installing a filter.
The blower may never be operated with open
discharge flange, and therefore has to be protected
with a wire guard in accordance with DIN EN 294.
Do not grasp into the discharge flange.
2.3 Temperature
Warning!
The blower housing assumes the temperature of the
conveyed medium during operation. If this is above
+50° C, the blower must be protected against direct
contact by the operator (danger of burning).
60
2.4 Motor circuit breaker
Before starting operation of the blower, the drive motor has to
be safeguarded by a motor circuit-breaker.
2.5 Proper application
The blowers are designed for conveying clean air only.
Using them for
G aggressive
G poisonous
G explosive or
G very moist
media is not permitted.
The maximum temperature of the conveyed medium must not
exceed +80° C. Solid particles or contaminants must be with-
held by a filter unit before entering the blower.
The maximum ambient temperature must not exceed +60° C,
the minimum not below –20° C.
The blower cannot be operated in an explosive atmosphere.
Special versions for applications not mentioned above are
available on demand.
Remodelling and modifications of the blower are not allowed.
With special appliances, the instructions in the supplementary
operating instructions also attached must be observed
and complied with. They deviate in certain points from these
operating instructions.