Safety Devices; Safety And Information Signs - Angelo Po 0N1CP1EL Manual De Uso

Although the appliance is complete with all
safety devices, during installation and con-
nection additional devices must be added if
necessary to comply with the relevant legal
requirements.
The illustration shows the position of the devices.
Safety thermostat: to cut off the electricity
A)
supply in case of overheating.
Important
Make a daily check that the safety devices are
properly installed and in good working order.
The illustration shows the position of the signs
provided.
Nameplate with manufacturer and
A)
appliance data.
General hazard: read the manual carefully
B)
before carrying out any procedure.
General hazard: when washing the applian-
C)
ce do not point pressurised water jets at
internal parts.
General hazard: all relevant regulations
D)
must be complied with. "No liability is ac-
cepted in case of failure to comply with the
installation and commissioning instructions".
General hazard: all relevant regulations
E)
must be complied with. "Install in complian-
ce with the relevant regulations and use in
well ventilated premises only".
Burn hazard: watch out for hot surfaces.
F)
General hazard: dry operation is forbidden.
G)
CE marking: this indicates that the equipment
H)
is compliant with all relevant laws applicable to
the product.
3320040_ut_GB_rev.1

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

- 5 -
A
A
A
D
E
G
37M3162
L
General hazard: drain the well completely
L)
after use.
WEEE Symbol: indicates that the appliance is
M)
subject to specifi c waste disposal regulations.
C B
F
37M3202
GB
H
A
M
ENGLISH