Water Connection - Angelo Po 0N1CP1EL Manual De Uso

Important
Those authorised to carry out the connection
operation must have experience acquired
and certifi ed in the specifi c sector, in accord-
ance with current legislation in the appli-
ance's installation country.
The connection must make to the proper
standards and must comply with all the rel-
evant regulations and legislation.
To make the connection, connect the mains
line to the appliance's connection pipe, fi tting a
shut-off tap (A), to allow the water supply to be
cut off when necessary. Easily accessible fi lters
must be fi tted downstream of the tap.
Caution - Warning
The appliance must be supplied with drink-
ing water having the characteristics shown
in the table.
Description
Pressure
pH
Conductivity
GB
Hardness
Salt and metallic
ion content
Chlorides
Sulphates
Iron
Copper
Manganese
(*) If the intake pressure exceeds 3 bar fi t a
pressure reducer.
3320040_inst_GB_rev.1

WATER CONNECTION

Value
150÷300 kPa (1,5÷3 bar)
(*)
7÷7.5
<200 mS/cm
9÷13°C (5÷7°d, 6.3÷8.8°e,
90÷125 ppm)
<30 mg/l
<40 mg/l
<0,1 mg/l
<0,05 mg/l
<0,05 mg/l
A
- 10 -
ENGLISH