Electrical Installation; Water Installation - DURAVIT SensoWash 610000 1 Serie Instrucciones De Montaje

Electrical installation

#610000 00 1 04 0100 Power supply
#610000 00 1 06 0100 Power supply
Circuit breaker
RCCB
Protection type
Position of electrical / water connection with
wall-mounted WC
IG ½"
265-300 mm
10 ⅜"-11 ¾"
Pre-Installation
> Lay a permanent power supply line:
• Connect a separate upstream circuit breaker
• Connect an upstream residual current device (RCD)
separating all poles
DAngEr!
risk of fatal electric shock.
> Do not use any unearthed extension cables when
connecting the Shower WC.
20
Connecting the Shower WC (Diagram 20)
nOTE! Avoiding property damage.
> Only connect the Shower WC to a socket with the
stipulated connected loads.
> Ensure that the power plug is accessible to users
after the installation.
SensoWash Starck_MAL_US_56936/16.08.2
120V ~ 60Hz
Rated power 1.33 KW
110V ~ 60Hz
Rated power 1.06 KW
I = 16 A
N
I = 30 mA
N
IP X4
..
285-300 mm
11 ¼"-11 ¾"

Water installation

Cold water DN 15(1/2")
Water pressure 0.07 - 0.75 MPa
(0.7 - 7.5 bar)
Water hardness max. 2,4 mmol/l
nOTE!
> Install a water water softener with water
hardness ≥ 2,. mmol/l (≥ 14° dH and/or
24° fH).
Position of electrical / water connection with
flor-standing WC
IG ½"
250-300 mm
9 ⅞"-11 ¾"
Pre-Installation
> Install the water connection and water outlet in the
specified areas.
DAngEr!
Health risk and potential product damage.
> Supply the WC with cold drinking water from the main
water system.
> Do not connect any waste water, grey water, industrial
water, sea water or other untreated or semi-treated
water.
Connecting water to a wall-mounted WC
10
(Diagram 10)
nOTE! Avoiding any malfunctions!
> Only use the water supply hoses provided.
Connecting water to a free-standing WC
17
(Diagram 17)
nOTE! Avoiding any malfunctions!
> Only use the water supply hoses provided.
..
250-300 mm
9 ⅞"-11 ¾"
5