Talking And Listening; Talk Range; Monitor Button; Menu Options - Motorola TALKABOUT T92 H2O Manual Del Propietário

Talking and Listening

All radios in your group must be set to the same channel and
Interference Eliminator Code in order to communicate.
1. Hold your radio 5–8 cm from your mouth.
2. Press and hold the PTT button while speaking. The Transmit
icon appears on the display.
3. Release the PTT button. You can now receive incoming
calls. When you do, the Receive
display.
For maximum clarity, hold the radio 2 to 3 inches away and
avoid covering the microphone while talking.

Talk Range

Your radio is designed to maximize performance and improve
transmission range. Do not use the radios closer than 5 feet
apart.

Monitor Button

Pressing and holding Scan/Monitor button 3 seconds
allows you to listen to the volume level of the radio when you
are not receiving. This allows you to adjust the volume, if
necessary. You can also press
check the activity on your current channel before you talk.
Push-to-Talk Time-out Timer
To prevent accidental transmissions and save battery life, the
radio emits a continuous warning tone and stops transmitting if
you press the PTT button for 60 seconds continuously.
icon appears on the
Scan/Monitor button to

Menu options

Two Way Mode
Menu Key
Channel (1-8
Menu Key
Sub Code (0-121)
Menu Key
Call Tone (1-20)
Menu Key
Voice Operated Transmission
(VOX) (Off, L1,L2,L3)
Menu Key
Dual Watch Channel (1-22)
Menu Key
Dual Watch Interference Eliminator Code
Menu Key
Vibrate Alert (On/Off)
Menu Key
Keypad Tones (On/Off)
Menu Key
Talk Confirmation Tones (On/Off)
Note: *Only Channels one to eight are available by default.
Channels 9 to 16 need to be activated by user before
they can be selected. Channels 9 to 16 should be
used in countries where these frequencies are
allowed by government authorities. Channels 9 to 16
are not allowed in Russia.
)
Menu Key
5