General Safety Notes; Intended Use; Material That Can Be Processed And Crimping Shape; Safety Equipment - Weidmuller Crimpfix E Manual De Instrucciones

2 General safety notes
2.1 Intended use
The machine is intended for the stripping and crimping of
flexible wires in one work process. Only the material de-
scribed below may be processed using the machine (wires
and wire-end ferrules).
Process-safe processing can only be guaranteed for Wei-
dmüller wire-end ferrules. The processing of other makes
may lead to faults and damage to the machine.
The machine must only be used within the technical limits
described (see section 3.1). The machine is designed for use
in dry, closed rooms. Modifications to and reconstructions of
the machine must not be performed.
Intended use also includes paying attention to the documen-
tation.
2.2 Material that can be processed and crimping
shape
Wires
Flexible PVC cable H05V-K and H07V-K with a cross section
of 0.5–2.5 mm².
High-temperature resistant, halogen-free or other specially
produced insulating materials of the same power types form
the exceptions here.
Wire-end ferrules (WEF)
Weidmüller belted wire-end ferrules (WEF) with plastic
shroud:
H0,5/14
H0,75/14
H1,0/14
H1,5/14
H2,5/14
Crimp form
Trapezium (Standard)
2516390000/03/07.2018
2.3 Safety equipment
The machine is equipped with the following safety devices:
– Safety switch inside on the front flap
– Mains adapter
These items of safety equipment must not be rendered inef-
fective. They must be checked once per year by a service
technician.

2.4 Personnel

Only trained personnel may operate the machine and per-
form maintenance activities. Training also includes having
fully read the operating instructions.
Repairs may only be performed following con-
sultation with Weidmüller Service and only by
an electrical specialist.
Keep the operating instructions stored so that
they can be inspected by operating personnel at
any time.
All documents can also be downloaded from
the Weidmüller website.
31