Rear Panel Connections - Creative E-MU 1212M PCI Manual Del Usuario

EMU QS(En).fm Page 14 Thursday, October 26, 2006 11:09 AM

Rear Panel Connections

4 Balanced Line Level Inputs
(configured as 2 stereo pairs)
1L
1R
In
Out
1L 1R
6 Balanced Line Level Outputs
(configured as 3 stereo pairs)
Four balanced 24-bit, line-level, analog inputs are provided (Stereo 1-2). These can be used to
input any line level signal such as a keyboard, CD-player, cassette deck, etc. (The analog inputs are
assigned to mixer strips in the PatchMix DSP mixer application.) Input line level can be set to
Line Level
accommodate the consumer -10dBV standard, or the pro audio +4 dBu standard in the I/O screen
Analog Inputs
of the Session Settings dialog box.
Either TRS balanced or TS unbalanced cables can be used. Balanced cables provide better noise
immunity and +6dB higher signal level, but standard mono instrument cables also work well.
14 - E-MU PCI Digital Audio System
Turntable Inputs
(tied to line input 2)
Phono
2L 2R 2L 2R
3L 3R
2L 2R
Turntable MIDI Port
Ground Connector
MIDI Cable
Gnd
Out
1 2 3
Alternate Outputs
(same as outputs 1-3)
48 Volt DC
Power Input
48 VDC
+ -
EDI
Connect to
1010 PCI Card