Troubleshooting - Silvercrest SOKL 1920 B2 Instrucciones De Montaje

Ocultar thumbs Ver también para SOKL 1920 B2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 127
˜ Troubleshooting
The application
 
cannot find the
 
camera
 
 
 
No image
 
appears
 
Poor image
 
quality
 
Image flickers
 
Motion detection
 
is not working
 
properly
 
Cannot record
 
video clips
 
E-mail alert is not
 
working
 
White spots
 
appear at night
time shooting
microSD card
 
error
 
 
Wi-Fi router
 
cannot be found
 
 
Make sure your home network supports the DHCP protocol .
Make sure the router/Wi-Fi router and the camera is on .
Make sure the camera and your smart device are connected to the same Wi-
Fi router during initial configuration .
Make sure all the cables were properly connected .
Use the "Add Device" function to manually add the camera .
Make sure the smart device is connected to 3G/4G/Wi-Fi properly .
Make sure the camera is properly configured .
Clean the camera lens using a slightly moistened cloth .
Other wireless devices may reduce the signal strength . Leave as much space
as possible between the camera and other wireless devices .
Make sure to select the appropriate "Environment Mode" setting .
Make sure the sensitivity setting is enabled .
Clean the sensor with a slightly moist cloth . Accumulated dirt and lint may
obstruct the motion detector sensor .
Check if the masking was programmed incorrectly .
Make sure the microSD card has been correctly inserted and formatted .
Make sure the motion detection function has been enabled .
Make sure the email alert function is enabled .
Make sure the e-mail address has been correctly entered .
The camera's infrared LEDs produce invisible light that reflects off glossy or
reflective surfaces, such as glass . Check and, if needed, change the camera
angle / Install the camera under a well-lit area .
Make sure the microSD card is correctly inserted and formatted .
Make sure to use an Class 10 rated microSD card or faster .
Format the microSD card when it is used for the first time .
Make sure SSID broadcasting function is enabled . Consult your Wi-Fi router
manufacturer if necessary .
Refer to the user manual of the Wi-Fi router .
Contact the system administrator of your network .
GB/IE
51

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido