Basic Safety Instructions - Ega Master 79621 Manual De Instrucciones

This pneumatic axial fan must be operated with max. 4 bar only.
Conditions for operation in an explosion hazard area
The following requirements must be met before operating the pneumatic axial
fan in areas subject to explosion hazards:
. The specifications on the type plate meet the requirements of the local
operating conditions in respect of
explosion hazards (machine group, explosion hazard category, temperature
class).
. It is ensured that the operating pressure of 4 bar is not exceeded.
We recommend equipping the pneumatic axial fan with a pressure regulator
(see accessories).
. All components connected to the pneumatic axial fan carrying a risk of ignition
have the required approval certificates.
. All required safety devices are installed.
. Ensure that the pneumatic axial fan is earthed in accordance with the
regulations.
Read operation instructions/safety instructions!
Before working on or with the tool, read the safety instructions and follow the
instructions during operation.
Do not modify machine or machine tools and accessories after receipt. Permission from the
manufacturer must be obtained before any modifications or alterations are done in compliance with
all safety instructions. Use the machine only for its intended use. Observe the technical data of the
equipment and the ambient temperatures.
Pay attention to labels, restrictions of use and special instruction notes on the machine tools and
the machine itself. Regularly check that the type plate and symbols on the machine are legible. If
necessary, contact the manufacturer to replace them. Only operators with technical knowledge,
trained by authorized responsible technical personnel, may install, adjust, operate, transport and
store the machine.
STARTUP

BASIC SAFETY INSTRUCTIONS

35