Publicidad
101
Trouble shooting
Code C0
Setting the factory-adjusted modes of operation
(see Section 5.)
0* =
No action
1 =
Set default values
(state 1 is only shown briefly)
The selected mode of operation can be transferred to
the permanent memory.
Code C1
Selecting the resolution of unbalance readings in
1 or 5 g, or 0.05 or 0.25 oz increments
0* =
5 g (0.25 oz) increments
1 =
1 g (0.05 oz) increments
The selected mode of operation can be transferred to
the permanent memory.
Code C2
Selecting suppression of minor unbalance
readings
0* =
Suppression off
1 =
Suppression on
The selected mode of operation can be transferred to
the permanent memory.
* = Factory adjusted mode
Operator's Manual
EEWB746A
Publicidad
