Important Recommendations; Electrical Safety; Working Area - TRAPP DM 50 Manual De Instrucciones

Desgranador de maíz
Ocultar thumbs Ver también para DM 50:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

www.trapp.com.br
Congratulations!
You have just acquired a quality product with the highest tecnology developed by
TRAPP. This product was designed to work quickly and efficiently, providing total
safety, at low cost. Safety measures should be followed to operate this equipment.
The safety measures stated in this instructions manual do not cover all possible
situations which may occur during usage. The operator must be aware that common
sense, attention, and precautions cannot be incorporated into the product, therefore
caution should be taken when operating and servicing TRAPP shredders.
Attention!
Read all the instructions in this manual
before operating the equipment. Always
observe and follow the safety indications
to prevent accidents and/or injuries.
Read and keep these instructions

1 - Working area

Do neither use the equipment near explosive

environments nor near flammable liquids, gases
and/or dust under suspension. The equipment
electrical installation produces sparks that may ignite
flammable liquids, gases or dust under suspension.
Keep children and away. People, especially

children, must remain at a safe distance from the
working area when the equipment is being used.
The operator/user is responsible for accidents that
may occur.
Never leave the combustion motor running in an

enclosed or unventilated environment, the exhaust
gas contains carbon monoxide, an odorless, lethal
gás.

Important Recommendations

2 - Electrical safety

Do not expose the equipment to either rain or

humidity. Install the equipment in a dry place,
protected from weather conditions. Water inside the
equipment increases the risk of electrical shock.
For your safety, ground the equipment. Failure to

do so may result in an accident, electrical shock or
personal injury.
If you need maintenance and spare parts, get in
touch with you local distributor or an authorized
technical assistant:
In case of further difficulties, get in touch with:
METALÚRGICA TRAPP LTDA.
Av. Pref. Waldemar Grubba, 4545 - Cx.P. 106
89256-502 Jaraguá do Sul - SC - Brasil
Teléfono: +55 47 3371-0088 / +55 47 2107-8800
Telefax: +55 47 3371-1997
e-mail: trapp@trapp.com.br
33

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dm 50g

Tabla de contenido