TRAPP DM 50 Manual De Instrucciones página 42

Checking:
Before operating the equipment, check:
Whether there are tools or objects on the motor or

on the equipment, especially inside the feeding
funnel.
If there is something obstructing the motor.

If the rotation direction is correct.

If the voltage of the power source is the same of that

of the equipment.
If all screws are tight.

If there are no people in the direction of the straw

and threshed maize outlet chute.
Whether there is a container for collecting threshed

maize in the maize outlet chute.
Notes:
Operate the equipment only when it

is empty and after checking the above
items.
Start feeding only when the nominal

operating speed is reached.
Do not stop the machine when it is

being fed and/or has material inside it
except in an emergency situation.
Always insert the ear of corn into the funnel upside

down as shown in Figure 4.
Take care not to overload the motor.

Attention!
Use dry corn only.

The ear corn must be inserted into the

machine always point down.
42
Operation Instructions
Figure 4
Attention!
Maize thresher feeding must be in

sufficient amounts to maintain the
machine working, avoiding overload
or lack of material, thus producing a
better performance.
The maizes and straws are thrown by

the outlet chute, be careful as they
come out at high speed and may cause
personal injury.
Insert another ear of corn into the

feeding funnel only after the threshing
straw and cob come out and so on.
www.trapp.com.br
Image merely illustrative