Promax OD-590 Manual De Usario página 197

USER'S MANUAL. OD-590/91/92
1. Press the Utility key→F5. To select No Go When (violation
condition), press F4 repeatedly.
2. Press F3 and go into Go-No Go menu.
3. To select the test subject signal, press F2 repeatedly.
4. To select the violation event, press F3 repeatedly.
5. Press F1 and go into template edit menu.
6. To select the template, press F1 repeatedly.
7. To select the template source, press F2 repeatedly.
8. To select the template position (Maximum/Minimum) or tolerance
(Auto), use Variable knob.
9. To save the edited template, press F4.
10. To go back to the previous menu, press F5.
Go-No Go test ... (condition of violation)
Template
Max
Source of the insole
Template source
Min
Template position
Page 71
No Go = the subject signal is within the
template.
No Go = the subject signal is violating the
template.
Sets the maximum level of the template.
RefA: One of the four reference waveforms.
M1~20: One of the twenty internally stored
waveforms.
±12/Div.
Sets the minimum level of the template.
RefB: One of the four reference waveforms.
W1~W20: One of the twenty internally
stored waveforms. To store a waveform
(template)
01-2007