Fitting The Harness; Switching On; Switching Off - Stihl HTE 60 Manual De Instrucciones

English

Fitting the Harness

A shoulder strap may be used if required
(special accessory).
The type and style of the shoulder strap
depend on the market.
Shoulder strap
2
N
Put on the shoulder strap (1).
N Adjust the length of the strap so that
the spring hook (2) is level with your
right hip when the machine is
attached.
46

Switching On

1
N Make sure you have a secure and
balanced footing.
N Hold the unit with both hands – right
hand on the handle housing – left
hand on the drive tube.
N Stand upright – hold the unit in a
relaxed position and always on right
side of your body.
N Do not rest the saw chain and guide
bar on the ground.
N Press down the starting lockout
lever (1) and hold it in that position.
N Squeeze the trigger switch (2).
1
2

Switching Off

N
Release the trigger switch and
starting lockout lever.
Note that the chain continues to
run for a short period after you let
go of the trigger switch and
starting lockout lever – flywheel
effect.
During longer work breaks – disconnect
the plug from the wall outlet.
When the power tool is not in use, store
it in such a way that it does not endanger
others.
Secure it against unauthorized use.
HTE 60