2
Technical Data
Rated voltage range ...................................
Temperature ...............................................
Aeration ......................................................
Weight ........................................................
Protection class ..........................................
Dimensions .................................................
3
Function of the Unit
3.1
Operation
The apparatus must be connected to an external air supply. We recommend to use our air
blower.
If you connect to a compressor, an oil- and water separator must be superposed.
An additional air regulation can be done on the rear handle.
The adjusted temperature by the poti has been controlled electronically.
When work is finished pull off the power plug and for cooling the heating element let the ex-
ternal air supply run for approx. 1 minute.
Do not let the apparatus run without charge. Do not close the air escape.
Put down the apparatus on a fire resistant base!
3.2
Replacement of heating element
Heating Element 1500 W, no. 55800
Loosen the 4 screws on the heating element and pull the tube forwards.
The element is pushed into place and is removed by simply pulling out.
Reverse the procedure to fit the new element
IMPORTANT: The insulation tube must always be put back into place!
4
Care and Maintenance
Both testing and maintenance works must be carried out by our service departments or by an
electrician only.
5
Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using our service-after-
sales hotline:
Phone:
+ 49 (0) 61 95 / 800 – 8200
Fax:
+ 49 (0) 61 95 / 800 – 7491
Email:
service@rothenberger.com
www.rothenberger.com
10
1500 W, 230 V, 50/60 Hz
520-700 °C, infinitely adjustable
80 – 250 l/min.
0,395 kg + 3m connection cable
II /
Length 270 mm, Handle diameter 54 mm
ENGLISH