Jacobsen AR3 Manual De Seguridad, Funcionamiento Y Mantenimiento página 14

3 SAFETY
Exposure limits are calculated as a combination of the vibration level (magnitude) of the tool and the
Daily Exposure Time (Trigger Time). E.g. A product with 5m/s² vibration can be used up to 2 hours/day to
Exposure Action Value (EAV) - Daily vibration exposure A(8) = 2.5m/s²
Where daily vibration exposure A(8) is below 2.5m/s² the risk is relatively low and no action need be
Exposure Limit Value (ELV) - Daily Vibration Exposure A(8) = 5.0m/s²
If several tools are use the exposure values must be combined:
Never Mow If There Is A Risk Of Lightning Or You Hear Thunder. If You Are In The Middle Of Mowing,
Stop In A Safe Place, Turn Off The Engine And Go Inside a Building.
When You Do Any Welding On The Machine, The Battery, Controller And Display Must Be Disconnected
Before You Start. You Must Not Open The Controller. If The Controller Is Opened, This Can Cancel All Of The
Personal Protective Equipment (PPE), For Example Safety Glasses, Leather Work Shoes Or Boots, A Hard
Hat, Leather Work Gloves And Ear Protection Must Be Used After The Owner/User Completes A Local Risk
Training In All Manual Operations Must Be Given By An Approved Person Before The Machine Is Used The
en-14
Vibration Exposure Limits
reach the EAV and up to 8 hours/day to reach the ELV.
Total exposure is then the combined value of the activities
Warranties And Can Cause The Failure Of The Machine.
Assessment Of The Mower, To Prevent Injury.
WARNING
taken
WARNING
CAUTION
CAUTION
First Time.