Delete Wireless Sensors And Remote Controls; Pair New Wireless Siren; Delete Wireless Siren; Emergency Call - Smanos X330 Manual Del Usuario

EN

Delete Wireless Sensors and Remote Controls

Press and hold the [Connect ] button on the control panel for more than 5 seconds,
the control panel beeps once, all the sensors and remote controls are deleted.
OFF-ON
POWER
12V/0.5A

Pair New Wireless Siren

The Siren is sold separately.
1. Siren enters pairing state (refer to the related user manual).
2. Press the [SOS] button on this control panel.
When you hear a beep from the siren, the siren is paired successfully. If you hear the
siren beeps twice, the siren has already been paired before.

Delete Wireless Siren

Press and hold the connect button of the wireless siren, the deletion is succeeded when
one beep is heard from the wireless siren.
21
X330-UM-EN-FR-ES-PT-V1.0.indd 21-22
OFF-ON
POWER
12V/0.5A
SIM

Emergency Call

In case of any emergency, press the [SOS] button on the control panel or remote
control to trigger an alarm. The control panel sounds immediately, then notify users
through SMS and call the pre-stored numbers.
SMS content: Emergency call.

Record Alarm Message

When the alarm is activated, the control panel will call the set emergency numbers
and play a pre-recorded alarm message. This message can be recorded by pressing
the [Connect ] button for 3 times. From that point you have 10 seconds to leave a
message.

Restore System to Default Setting

Press and hold the [Connect ] button, and then press the
panel beeps 3 times, all settings are restored to default setting, but the paired
accessories are still working.
TAMPER
OFF-ON
POWER
12V/0.5A
EN
[SOS] button, the control
SOS
22
2016/8/19 15:41:12