Faber GLASSY Serie Instrucciones De Instalación página 13

ELECTRICAL INSTALLATION WITH CONNECTION
GROUNDING INSTRUCTIONS This appliance must be
grounded. In the event of an electrical short circuit, grounding
reduces the risk of electric shock by providing an escape
wire for the electric current. This appliance is equipped
with a cord having a grounding wire with a grounding plug.
The plug must be plugged into an outlet that is properly
installed and grounded.
WARNING - Improper grounding can result in a risk of
electric shock.
Consult a qualified electrician if the grounding instructions
are not completely understood, or if doubt exists as to
whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is
too short, have a qualified electrician install an outlet near
the appliance.
ELECTRICAL INSTALLATION WITH
OPTIONAL WIRING BOX
For Permanent wiring Installation-Use only
with Listed rangehood Wiring Box kit
sku # WIREBOX, manufactured by Faber.
19
For Non-Ducted Recirculation
Attach a
charcoal
filter in the
correct
position and
block it by
the fixing
hooks as
shown.
Unlock the fixing hooks (towards the back of the
insert hood) to remove.
Required Activated Charcoal Filter
Accessory - sku # - FILTER2
(purchased separately)
CABLE
Option
Direct Connect Wiring Box
Accessory sku # WIREBOX
(purchased separately)
Max. 33 "
7/16
13