Display; Symbols And Text - Adam Nimbus NBL Series Manual Del Usuario

EN

7 DISPLAY

The LCD has several areas-
A large 7 digit area to display the weight with symbols for common weighing units on its
right and symbols for zero, tare (Net) and stability on the left.
Text symbols above the display show the current operation or function being used.

7.1 SYMBOLS AND TEXT

The LCD has unique symbols to indicate the following:
0
g, mg, kg, ct, dwt, GN, ozt, oz,
N, Custom, g/cc, Pcs, %,
Indicators:
"CAL"
"T"
"ºC"
"Net"
"Dynamic"
"Hold"
"Parts"
"Percent"
"Density Solid"
"Density Liquid"
© Adam Equipment Company 2015
Zero
Busy
Stable
Symbols shown for units and modes
Battery charge symbol
When calibration is occurring or about to occur
For a time driven calibration
When a temperature is shown or a temperature driven
calibration is to occur
When a net weight is shown
When the balance is in the animal weighing mode
When the balance is in hold mode
When the balance is in the Parts counting mode
When the balance is in the Percent weighing mode
When the balance is in the Solid Density mode
When the balance is in the Liquid Density mode
14
3016612481Rev2.00-Jul15