Weighing - Adam Nimbus NBL Series Manual Del Usuario

EN

10.3 WEIGHING

Press [ 0/T] to zero the balance if required. The "
Carefully place a mass on the pan and the weight will be displayed with the
on the left hand side of the display to indicate that a stable reading has been obtained.
If a container is to be used, place it on the balance and press [
When the balance symbol
balance is tared.
When the display shows zero, place the item to be weighed. Only the net weight will be
displayed.
When a tared weight has been stored, pressing [
At any time the [Unit] key may be pressed to select another unit. Use the [Up] or [Down]
keys to scroll through the units and select the desired unit by pressing [Setup], the display
will change to show the weight in the selected weighing unit. The available weighing units
can be enabled or disabled during setup of the balance (see section 13.1). Only weighing
units that have been enabled will be cycled through when [Unit] is pressed.
Weighing Units:
Note: Approved units have a restricted range of units available, depending on country of
approval.
You can select alternative weighing units to display the weight by pressing the [Unit] key.
Depending on model, the available weighing units may include:
Unit
1 GRAMS
2 MILLIGRAMS
3 KILOGRAMS
4 CARATS
5 PENNYWEIGHT
6 GRAINS
7 TROY OUNCES
8 OUNCES
9 POUNDS
10 POUNDS:OZs
11 CUSTOM
It is possible to set the balance to display only grams. Grams will always be one of the
units enabled, by default.
If "Custom" unit is available and selected, the balance will prompt for entering a multiplier
by displaying "CF 1.2345", where "1.2345" is the last stored value. Any value ranging from
0.100 to 10.000 may be entered, by which the weight in grams will be multiplied before
© Adam Equipment Company 2015
Net
is on, the " " symbol will be displayed to indicate that the
Symbol Models
g All
mg not 0.01g &
0.1g units
kg 0.01g & 0.1g
units
ct All
dwt Some models
GN Some models
ozt Some models
oz Some models
lb Some models
lboz Some models
Custom Some models
0

" symbol will be displayed.
0/T] to tare the weight.
0/T] again will remove it.
Conversion
Factor
1g =
1
1000
0.001
5
0.643014865
15.43236
0.032150747
0.035273962
0.00220462
0.035273962
As specified
19
3016612481Rev2.00-Jul15
symbol
Conversion
Factor
1 unit = grams
1.0
0.001
1000
0.2000
1.555174
0.0647989
31.103476
28.349523
453.59237
1 lb = 16 oz
As specified