Disimballaggio; Posizione Della Bilancia - Adam Nimbus NBL Series Manual Del Usuario

IT

4 DISIMBALLAGGIO

Rimuovere la bilancia dall, imballaggio sollevandola con cautela, fuori dalla scatola.
All'interno della scatola troverete tutto il necessario per iniziare a utilizzare la bilancia.
Seguire attentamente la guida d'installazione per assemblare la bilancia

5 POSIZIONE DELLA BILANCIA

© Adam Equipment Company 2015
• Adattatore di alimentazione di rete AC con cavo
•
Piatto in acciaio inossidabile
•
Sotto piatto in lega
•
Schermo per correnti d'aria (solo modelli di mg)
•
Manuale d'istruzione
The balance should not be placed in a location that will
reduce the accuracy.
Avoid extremes of temperature. Do not place in direct
sunlight or near air conditioning vents.
Avoid unsuitable tables. The table or floor must be rigid
and not vibrate.
Avoid unstable power sources. Do not use near large
users of electricity such as welding equipment or large
motors.
Do not place near vibrating machinery.
Avoid high humidity that might cause condensation.
Avoid direct contact with water. Do not spray or immerse
the balances in water.
Avoid air movement such as from fans or opening doors.
Do not place near open windows or air-conditioning
vents.
Keep the balance clean. Do not stack material on the
balances when they are not in use.
Avoid sources of static electricity. This can affect
measurement accuracy and may damage sensitive
electronics.
218
3016612481Rev2.00-Jul15