Handling; Transport - Kollmorgen AKM Serie Manual Del Producto

Handling

Handling
14
14.1

Transport

l
l
l
l
l
l
Lifting eyes must be used to safely transport AKM7 and AKM8 motors (> 20kg). Observe
any transport instructions included in the packaging of the motor. We recommend the
transport tool ZPZM 120/292 for moving the motors. Suspension Unit ZPMZ 120/292 con-
sists of a beam, suspended to the crane hook and two double-run chain suspenders.
Swinging load. Risk of death if load falls. Never step under the load, while the mo-
tor is raised.
l
l
l
l
English - 36
08/2012
Climate category
Temperature
Humidity
Only by qualified personnel in the manufacturer's original recyclable packaging
Avoid shocks, especially to the shaft end
If the packaging is damaged, check the motor for visible damage. Inform the carrier
and, if appropriate, the manufacturer.
The fastening screws of the lifting eyes must be fully screwed in.
The lifting eyes must be positioned on the supporting surface in an even and flat
manner.
Prior to use, check the lifting eyes for secure fitting and any obvious damages (cor-
rosion, deformation).
Lifting eyes with deformations must not continue to be used.
2K3 to EN61800-2
-25...+70°C, max. 20K/hr change
rel. humidity 5% - 95% , no condensation
Kollmorgen
Servomotors AKM