Wall Installation - Honeywell EW701 Instrucciones De Operación E Instalación

Wall installation

(1) Fasten the clip ring (a) at the desired wall position. (Fastening materials
not included) Align the clip ring such that the cable feed-through (b) faces
upwards.
(2) Excess connection cable (calculator unit) can be found around the winding
fastener (c) in the clip ring.
(3) Latch the calculator unit securely onto the clip ring (should be fl ush).
(4) The clip adapter (d) is not required for wall mountings.
NOTE:
With wall mounting using the clip ring (a), only add-on modules with a
max. housing height of 29 mm can be used.
V1.00 / 3.5.2018
b
MU2H-0501ge23 R0318
a
c
d
45 EN