Parameter Settings; To Activate Programming Mode - Honeywell EW701 Instrucciones De Operación E Instalación

Parameter settings

To be able to activate programming mode, you have to be authorised for
programming by entering a PIN.
The default standard PIN is printed on the packaging product label.
Once the PIN has been accepted, further values can be programmed without
PIN input. Validity is lost if a level other than L3 is set.

To activate programming mode

Press the < H > or < V > key longer than 3 seconds to open the level operating
scheme.
1. Use the < H > key to navigate to the respective display
level (L3).
2. Use the < V > key to display the respective value (here:
due date).
3. Activate programming mode using the key combination
< H > and then < V >. Keep this key combination pressed
+
until the display for password entry appears.
Press the < V > key several times briefly until the value
4.
for the flashing segment block has been reached.
5. Press the < H > key to jump to the next segment block.
6. Repeat steps 4 and 5 until the password has been entered
completely.
Confirm acceptance of the password using the key com-
7.
bination < H > and then < V >. When the password has
+
been entered, the display changes to the value to be
programmed.
EN 60 MU2H-0501ge23 R0318 V1.00 / 3.5.2018