Sears Craftsman 917.28972 Manual Del Usuario página 24

9. Turn steering wheel to position wheels
straight forward.
10.ATTACH FRONT LINK (E) - Work from
left side of tractor, insert rod end of link
assembly through front hole in trac-
tot front suspension bracket (F) and
secure with retainer spring (G) through
hole in link located behind the bracket.
11. Insert other end of link (E) into hole in
front mower bracket (H) and secure
with washer and retainer spring (J).
12. Disengage belt tension rod (K) from
locking bracket (L).
13. Insta!l belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper rout-
ing in all mower pulley grooves,
14. Engage belt tension rod (K) on locking
bracket (L).
CAUTION: Belt tension rod is spring
loaded. Have a tight grip on rod and en-
gage slowly.
I5. Raise attachment lift lever to highest
position.
16. If necessary, adjust gauge wheels be-
fore operating mower as shown in the
Operation section of this manual.
24
FUNClONAMf
Tu tractor est&
Funcionamien
tiva del operac
embrague puE
que la Ilave dE
de "ON" (;lel R
ATENClON: I
puesto para cl
Poniendo el R
permitir et fun_
embrague pu_
cuando el ope
para reposlclo
embragado. 1_
sea absoluta
USAR EL SIS
ATRAS -
]. Presionar
2. Con elrnc
interruptol
inverso al
posici6n ",
3. Mirar abaj
4. Presione I
impulsi6n
5. Cuando e
d6 vuelta,
de las agL
Posicl6n RO
k_
PARA OPER
_ADVERTE
cia abajo en
a 15 _ y no m_
ente. Utitice I_
nada en la p;
• Escoja la
rancar hac
• Evite paral
• Si es abso
ernpuje el
posici6n dt
estacionar
• Para volve
suel[e lent
miento y e