Check Tire Pressure - Sears Craftsman 917.28972 Manual Del Usuario

CHECK TIRE PRESSURE
The tires on yourtractorwereoverinflated
at the factoryfor shippingpurposes. Cor-
rect tire pressureis importantfor best
cuttingperformance.
o Reducetire pressureto PSIshownon
tires.
CHECK
DECK LEVELNESS
For best cutting results, mower hous-
ing should be properly leveled. See "TO
LEVEL MOWER" in the Service and
Adjustments section of this manual.
CHECK FOR PROPER POSITION
OF ALL BELTS
See the figures that are shown for replac-
ing motion and mower blade drive belts
in the Service and Adjustments section
of this manual. Verify that the belts are
routed correctly.
CHECK BRAKE SYSTEM
After you learn how to operate your trac-
tor, check to see that the brake is operat-
ing properly. See "TO CHECK BRAKE"
in the Service and Adjustments section of
this manual.
v'CHECKLIST
Before you operate your new tractor, we
wish to assure that you receive the best
performance and satisfaction from this
Quality Product.
Please review the following checklist:
¢" All assembly instructions have been
completed.
¢" No remaining loose parts in carton.
v" Battery is properly prepared and
charged.
v" Seat is adjusted comfortably and tight-
ened securely.
v" All tires are properly inflated. (For ship-
ping purposes, the tires were overin-
flated at the factory),
v" Be sure mower deck is properly leveled
side-to-side/front-to-rear for best cutting
results. (Tires must be properly inflated
for leveling).
v" Check mower and drive belts. Be sure
they are routed properly around pulleys
and inside all belt keepers.
v" Check wiring. See that all connections
are still secure and wires are properly
clamped,
¢" Before driving tractor, be sure freewheel
control is in "transmission engaged"
position (see "TO TRANSPORT" in the
Operation section of this manual).
While learning how to use your tractor, pay
extra attention to the following important
items:
v" Engine oil is at proper level.
v" Fuel tank is filled with fresh, clean, regu-
lar unleaded gasoline.
,/Become familiar with all controls, their
location and function. Operate them
before you start the engine.
¢' Be sure brake system is in safe operat-
ing condition.
v" Be sure Operator Presence System
and Reverse Operation System (ROS)
are working properly (See the Opera-
tion and Maintenance sections in this
manual).
v" It is important to purge the transmission
before operating your tractor for the first
time. Follow proper starting and transmis-
sion purging instructions (See "TO START
ENGINE" and "PURGE TRANSMISSION"
in the Operation section of this manual).
MOTOR
Et mantenirnie
de cualquier d
de la ernisi6n,
del ctiente, put
individuo o esl
motor. Los rep
deben ser real
servicio de re_
PARA AjUST
DE LA ACELI
El control de 11
en la f&brica y
Revise los aju
aci6n, antes d
necesario, pro
I. Con el mo
palanca dE
posici6n d
2. Revise qu
en contra
tornillo de
hacia atr&,
est_ en cc
sujeci6n d
PARA AJUS1
TRANGULAC
El control de I_
preajustado e
ajustes. Revis
a continuaci6_
el ajuste es n_
siguiente:
1. Con elrnc
de la estrE
del tablerc
compteta.
2. Suelte la
la cubiert_
3. La estran!
no 1o estA
de la caja
laci6n has
completer
de sujeci_
4, Vuetva al
del filtro d
8