Self-Clean Oven - Maytag Precision Touch 850 Serie Guía De Uso Y Cuidado

Self-Cmean Ovens
* It is normal for parts of the ovens to become hot dunng a
is acid-resistant, not acid-proof. The porcelain finish may
discolor if acidic or sugary' spills are not wiped up before a
self-clean cycle.
To prevent damage to o\ en doors, do not attempt to open
the doors when LOCK is displayed.
Avoid touching doors windows or oven vent area during
a clean cycle.
Do not use commercial oven cleaners on the oven finish
or around any part ot the ovens. They will damage the
finish or parts.
Do not meavebaking/pizza stone in the oven during
self=dean.
The self-clean cycle uses above-normal cooking temperatures
to automatically clean the oven interior.
It is normal for flare-ups, smoking, or flaming to occur during
cleaning if the oven is heavily soiled. It is better to clean the
oven regularly rather than to wait until there is a heavy build-
up of soft in the oven.
During the cleaning process, the kitchen should be well
ventilated to get rid of normal odors associated with cleaning.
Before Self-Cmeaning
1. Turn off the oven light before cleaning as the light may
burn out during the clean cycle.
2. Remove broiler pan, all pans, and oven racks from the
oven. The oven racks will discolor and may not slide easily
after a self-clean cycle if they are not removed.
3. Clean oven frame, door frame (area outside of gasket, and
around the opening in the door gaske0 with a nonabrasive
cleaner such as Bon Ami* or detergent and water. The
self-cleaning process does not clean
these areas. They should be
cleaned to prevent soft from baking
on during the clean cycle. {The
gasket is the seal around the oven
door and window.}
4. To prevent damage, do not clean or rub the gasket around
the oven door. The gasket is designed to seal in heat
during the clean cycle.
5. Wipe up excess grease or spillovers from the oven bottom.
This prevents excessive smoking, flare-ups or flaming
during the clean cycle.
6. Wipe up sugary and acidic spillovers such as sweet
potatoes, tomato, or milk-based sauces. Porcelain enamel
\
Notes:
, Oven temperature must be bdow 400° F to program a
dean cyde,
, Only one oven can be cleaned at a time.
Both oven doors lock when either oven is being
cleaned.
To set Self-Clean:
1. Close the oven door.
2. Press the Clean pad.
° CLEAN flashes.
° SETand UPPERor LOWER flash in the
display.
3. Press the Autoset pad.
° "MEd" (Medium Soft, 3 hours} is displayed.
a. Press the Autoset pad to scroll through the self-cleaning
settings.
"HVy" (Heavy Soft, 4 hours}
"MEd" (Medium soft, 3 hours}
"LITE" ( Light Soft, 2 hours}
Choosing the soft level of the oven automatically programs
the self-cleaning time.
5. After four seconds, the oven will start cleaning.
, If the door is not closed, beeps will sound and 'door' will
display. If the door is not closed within 30 seconds, the
self-cleaning operation will be canceled and the display
will return to the time of day.
, CLEAN will appear in the display.
, LOCK will flash in the display. Once the door locks,
LOCK will remain steady.
, The cleaning time will start counting down in the
display.
To Delay a Self-Clean Cycle:
1. Press the Delay pad once for upper oven and
twice for lower oven.
° DELAY flashes.
° 00:00 and UPPERor LOWER will flash in the display.
2. Enter the amount of time you want to delay the cycle
using the appropriate number pads.
3. Press the appropriate Clean pad.
° SETflashes in the display.
* Brand names for cleaning products are registered trademarks of the respective manufacturers.
19