Trimming Operation - Honda UMR435T Manual Del Propietário

7. TRIMMING OPERATION

Read and understand the safety instructions on pages 3 to 14 before
operating the grass/weed trimmer.
If you notice any abnormal sound, smell, vibration, or other unusual
signs, stop the engine immediately and consult your authorized Honda
dealer.
Shouldering the grass/weed trimmer:
Before shouldering the grass/weed trimmer, start the engine according
to the proper procedures (see page 34) and warm up the engine. Be
sure to check that the idling rotation becomes stable and the cutting
attachment (nylon-line cutting head or cutting blade) does not turn.
Shoulder the grass/weed trimmer according to the procedures
described below.
Note that the following procedures are for a righthand side use.
This grass/weed trimmer is able to change engine mounting direction.
Consult your authorized Honda dealer.
When you shoulder the grass/weed trimmer, be careful not to touch
the throttle trigger without your intention. If the throttle trigger is
pulled accidentally, the engine speed increases and the cutting
attachment may start turning, which cause injury. When the wheeling
cutting attachment touches the ground, the grass/weed trimmer may
go out of control causing injury.
1.Hold the loop handle with your
left hand and put the right
shoulder harness on your right
shoulder with your right hand.
2.Hold the loop handle with your
right hand and put the left
shoulder harness on your left
shoulder with your left hand.
38