Honda UMR435T Manual Del Propietário página 61

4.After checking that the inner
shaft is free from a part where
has become fine or where is
about to snap off, measure the
overall length of the inner shaft
and check that the measurement
is within 969 – 979 mm (38.1 –
38.5 in). If the measurement is
out of the specification, replace
the inner shaft with a new one.
Consult with your authorized
Honda dealer for replacement.
Overall length of new inner
shaft: 969 mm (38.1 in)
5.Apply grease to the entire outer
surface of the inner shaft evenly
from end to end.
Insert the inner shaft into the
flexible shaft assembly to
assemble (see page 59).
6.While turning the inner shaft
with your hand, push it in and
check that the cutting blade or
nylon-line cutting head turns.
58
INNER SHAFT
OVERALL LENGTH
969 - 979 mm
(38.1 - 38.5 in)