IMPORTANT SAFETY INSTRUCTIONS
Caring for the Cabinet
•
Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
•
Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main
unit cabinet or cause cracking.
•
Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
•
If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral
detergent diluted with water and thoroughly wrung out, and then wipe with a soft dry cloth.
•
The cabinet is primarily made of plastic. Avoid using benzene, thinner, and other solvents, as
these may deform the cabinet and cause the paint to peel off.
•
Do not apply insecticides or other volatile liquids.
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long
period of time. Plasticizers inside the plastic may cause the cabinet to deform and cause the
paint to peel off.
Caring for the Liquid Crystal panel
•
Turn off the main power and unplug the AC cord from the wall outlet before handling.
•
Gently wipe the surface of the display panel with a soft cloth (cotton, flannel, etc.).
To protect the display panel, do not use a dirty cloth, liquid cleaners,
or a chemical cloth (wet/ dry sheet type cloth, etc.). This may damage
the surface of the display panel.
•
Wiping with a hard cloth or using strong force may scratch the surface
of the display panel.
•
Use a soft damp cloth to gently wipe the display panel when it is really
dirty. (It may scratch the surface of the display panel when wiped
strongly.)
•
If the display panel is dusty, use an anti-static brush, which is commercially available, to clean it.
•
To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved
cleaning cloths are available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-
CLOTH-3) packs.
Call 1-800-BE-SHARP for ordering, or VISIT http://www.sharpusa.com/SharpDirect.
6