La Cornue CORNUCHEF Manual De Instrucciones página 25

RESIDUAL HEAT - DISPLAY SYMBOL H
When the symbol [H] appears on the display, it means that the corresponding cooking
zone is hot (the cooking zones are heated by the bottom of the pan).
The symbol [H] disappears when the cooking zones can be touched without danger (the
temperature has dropped to below 60°C).
As long as the symbol [H] of residual heat is on, do not touch the cooking
zones and do not place anything sensitive to heat on the ceramic glass.
Risk of burns and fire.
The residual heat can be used to keep food warm.
AUTOMATIC HEAT-UP - DISPLAY SYMBOL A
This function is available on all of the cooking induction areas.
It allows rapid heating up of the element to bring the selected cooking zone up to
temperature. Once the zone is at the required cooking temperature the power level will
reduce automatically to the preset level.
The function is selected by turning the control knob anti-clockwise for two sec. from
the zero position until the symbol [A] is shown on the hob control display. Once the
[A] is displayed, turn the control knob to the level of your choice [1 to 9]. The pan will
heat up at 100% power for a specified time before the power is reduced to the level
selected.
When the Automatic Heat-up function is activated, the hob control displays the [A]
symbol.
Once the Automatic Heat-up time has ended, the hob control display will stop the [A]
symbol and will display the chosen power level.
The Automatic Heat-up function can be stopped by either turning the control knob
back to the [0] power setting or turning the control knob to the [9] power setting.
25