La Cornue CORNUCHEF Manual De Instrucciones página 27

"BOOST" FUNCTION - DISPLAY SYMBOL P
Power Boost function allows additional power to be made available for each of the
cooking areas. This is useful to bring a large pan of water to the boil quickly.
All of the induction cooking zones have Power Boost available, activated by turning the
control knob clockwise beyond the indicator [9] until the symbol [P] is displayed. The
Power Boost function operates for a maximum of 10 minutes on each zone, after which
the power is automatically reduced to setting 9.
There are 2 ways to stop the "boost" function:
w Turn the control knob to a lower setting.
w Wait until the automatic stop function. For security reasons the system automati-
cally cuts the "boost" after 10 minutes.
The induction hob with 2 cooking zones has a maximum power of 3700 W. When the
"boost" function is activated, and in order not to exceed the maximum power, the
electronic control automatically reduces the power level of another heating zone.
For a few seconds, the display of this zone indicates [9] flashing symbol and then
displays the maximum possible cooking level.
"BRIDGE" FUNCTION - DISPLAY SYMBOL Π
Turn both control knobs simultaneously clockwise and hold them for at least two sec.
until the symbol [Π] appears. Then, adjust the power of the two cooking zones with
the left control knob. To stop the "bridge" function, turn both control knobs to the 0
position.
When using this function, the "Boost" function is not available.
27