Operating The Controls - Waring Commercial WFP7E Manuel De Instrucciones

• Plug the machine into an electrical outlet. The outlet must be 230 volts (50 Hz).
• There are two control levers located on the base of the machine. They are on the front and they give
you fingertip control of processing. They are large enough to find easily in case of emergency.
The control lever
has 3 positions:
How they work:
HOW TO USE
Continuous Use
For continuous processing, lift the lever to the ON ( ) position.
Pulsing
The pulsing function is intended for use with the S-blade in the work bowl.
• The motor runs as long as you hold the lever down; it stops when you release the lever.
• You control pulsing. You control the duration of each pulse by the amount of time you hold the
lever down. You control the frequency of pulses by the rate at which you press the lever. The interval
between pulses must be long enough to allow everything in the work bowl to fall to the bottom.
• Pulsing gives you precise control over chopping, mincing, blending and mixing. You can process food
to any texture or consistency you want, from coarse to fine.
• Pulsing is also useful in processing hard foods. Pulse the food a few times to break up into smaller
parts. Then proceed with continuous use after the pieces are broken up and easier to process.
• Always use the lever for pulsing. Never move the bowl (or chute) and cover assembly on or off to
control pulses. It is less efficient and could damage the machine.
Turning off
Always turn the machine to the OFF (
complete stop before removing the pusher assembly. The motor stops within seconds after the
machine is turned off.
10

OPERATING THE CONTROLS

ON ( )
OFF ( )
PULSE ( )
ON ( ): Lift the lever up to start the motor.
OFF ( ): To turn the motor off, move the lever to the OFF (
PULSE ( ): To pulse the motor, press the lever down, then release. The
motor will run as long as you hold the lever down; it stops when you release
the lever. Try it a few times.
) position and wait until the blade or disc comes to a
) position.