Flow Alarm; Calibration Menu - Astralpool EF Serie Manual Tecnico

It shows the alarms related to
• Low pressure
• High pressure

• Flow Alarm

Flow alarm is related to the water flow that is passing through the machine and it is activated when
it is not enough. Low and high pressure alarms are related to the next menu .Only reading menu
REARMED Menu:
Once we enter in this menu we see:
This menu can be used for modifying some of the alarms just when they appeared al least 3 times.
If the star is located alarm activated the machine will not started again until being reset. To reset
the machine it is necessary to press the key + until we reach the reset alarm position. Press OK and
after that the machine starts working again. If we press the key ESC we go back to the main menu.

CALIBRATION Menu:

Once we reach the Calibration Menu, if we press OK it will appear the following Submenu that it
is related to the machine Configuration
To go in it will be necessary the password. Contact the Technical Service to obtain it..
© TALLERES DEL AGUA S.L. 2008. TODOS LOS DERECHOS RESERVADOS. DOCUMENTO CONFIDENCIAL Y EN PROPIEDAD.
ENGLISH
Page 33 of 50