Error Signals; General Precautions - Astralpool EF Serie Manual Tecnico

6
7
8
9
10
11
12
13
IV. ERROR SIGNALS
Parameters

9. GENERAL PRECAUTIONS

The installation, start-up and maintenance should be performed by qualified personnel only.
This equipment should not be exposed to inflammable substances or explosives.
For any maintenance work done on the inside of the machine, proper care and precautions should
be taken to disconnect the main equipment from the power supply.
In maintenance operations the use of protective equipment such as goggles and gloves is required.
During operation of the equipment, it is normal that the condensation produced by the evaporation
unit will produce a certain quantity of water which will have to be evacuated. The machines have
an outlet tube for this reason on the corner of the back cover which should always be free of any
obstruction and connected to drain.
Decimal point
dP
HSEt Differential
tone Activation time output
OUT for probe broken
toFE Deactivation time output
OUT for probe broken
Func Output operation mode:
HEAt = Heat
CooL = Cool
od Delay at power on
PASS Access password to
parameters functions
SP Set Point
Description
E1 – E1 The probe may be
interrupted or in short
circuit or may measure
a value outside the
range allowed
EEPr Internal memory error
© TALLERES DEL AGUA S.L. 2008. TODOS LOS DERECHOS RESERVADOS. DOCUMENTO CONFIDENCIAL Y EN PROPIEDAD.
On – Off ON
0.0 + 30.0 1
OFF + 99.59 OFF
min.sec
OFF + 99.59 OFF
min.sec
HEAt – CooL Cool
OFF + 99.59 OFF
min.sec
OFF + 9999 OFF
SPLL + SPHL 0.0
Action
Check the correct
connection of the probe
with the instrument and
check the probe works
properly
Check and if necessary
re-programme the
parameters function.
ENGLISH
Page 37 of 50