Astralpool EF Serie Manual Tecnico página 35

• 000, with this constant we modify the working hours.
• 014, with this constant we vary the temperature of consignee.
• 124, starting defrost temperature constant.
• 139, ending defrost temperature.
• 238, calibration probe constant
By entering in this menu we automatically go into the timetable setting constants.
Timetable settings:
Nº: 00, nº: 01 nº 02; nº 04
These are the parameters to set starts/stops according to the user's settings. It is also possible to set
the day of the week and the week of the month
In order to make all these modifications you must reach the field that we want to program and then
press OK. Once selected we can change values by pressing keys+ and – .
Entering in the day of the week field , D: LMMJVSD, once selected thanks to keys + / -, we press
OK and the field will light on discontinuously. This means we can choose the day of the week that
we want to set. Press cancel to exit. The same happens with the months. With this function we can
do all the time set that will fix the working periods.
To exit from this menu press the ESC and we will come back to the main Menu.
© TALLERES DEL AGUA S.L. 2008. TODOS LOS DERECHOS RESERVADOS. DOCUMENTO CONFIDENCIAL Y EN PROPIEDAD.
ENGLISH
Page 35 of 50