Format Numbering Machine - Reiner jetStamp graphic 970 Manual De Instrucciones

jetStamp graphic 970

2.5.2. Format numbering machine

Number circle
Number circle:
Minimum:
Maximum:
Actual value:
The area in which the respective numbering machine counts is
determined in the number circle. A dedicated number circle can be
generated per numbering machine.
If a numbering machine is linked to a present number circle,
the number circle of the linked-to numbering machine is used
automatically.
Enter a minimum value or select it.
This value marks the lower threshold of the number circle.
Enter a maximum value or select it.
This value marks the upper threshold of the number circle.
In the field „actual value", the current status of the numbering
machine can be set (e.g. minimum: 10, maximum: 50, current
numbering machine status: 25, will lead to counting starting
at 25 after transfer).
This value is transferred when uploading to the device.
To change the numbering machine status in the device, the print
pattern must be transferred again.
GB
59