Electrolux DF42 Manual De Instrucciones página 33

Installation
Two people are required to remove the package base.
Carefully tilt the refrigerator for one side and breaks the side of the base
to remove it.
Tilt the refrigerator again to the other side and remove the rest of the
base.
Remove all foams and adhesive tapes of shelves and/or drawers.
2 – Choose the installation place
Respect the minimum distances between the refrigerator and the walls:
on top: 15 cm / side: 10 cm / back 10 cm.
Do not install the refrigerator outdoors or under the direct incidence of
sunlight.
Avoid placing the refrigerator next to chemicals or heat sources (stoves,
ovens, etc.), and areas with frequent water handling (tank, sink).
3 – Level the refrigerator
Close the refrigerator doors.
Turn the leveling leg until all are firmly resting on the floor. If necessary,
tilt the refrigerator carefully during leveling.
Avoid the refrigerator be tilted to one side or forward.
The only inclination is allowed back, to facilitate the doors closing.
After leveling your refrigerator, turn the stabilizer/leveling leg to touch the floor. The function of this is to
stabilize and level the product when the door is open and loaded.
Whenever moving the refrigerator, it's necessary repeat the leveling process.
Leveling is important because it prevents swinging movements, vibration and problems with your
refrigerator.
Do not use different leveling legs from the original ones.
33