Simmons VENTURE Manual De Instrucciones página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

UNIT OF MEASURE OPTIONS
The Venture laser rangefinder can be used to measure distances in yards (default setting) or meters. The unit of
measure indicators are located in the lower right portion of the LCD. To switch to meters, start with the unit powered
off, nothing displayed (remove/replace battery cover if necessary). Press the Power/Fire button and continue to hold
it down until the display changes to a blinking "Y"-continue to hold the button down, and the unit indicator will switch
to "M"-release the button now, and distances will now be shown in meters. To switch back to Yards, repeat this process
(power off, hold Fire button until blinking "M" changes to "Y").
TILT FEATURE (model SVL620BT only)
The Venture laser rangefinder model# SVL620BT features a built-in inclinometer that solves a problem hunters have
been faced with for years. Bow and rifle hunters have struggled with extreme uphill and downhill angles because
of how these angles alter true horizontal distance to your target. The Tilt feature solves this, with the integrated
inclinometer providing angular data to a processor chip when targeting objects that are either uphill or downhill. This
data is then combined with internal algorithmic formulas.
Along with the standard "line of sight" distance, the Venture laser rangefinder's display instantly
shows the "real" horizontal distance (when fire button is released) from 5-99 yards / meters. The
angle compensated horizontal distance is shown near the bottom of the display.
For example, a bowhunter in a tree stand may be aiming at a deer that is downhill at a -44
relative to his position. The line of sight distance is 32 yards, but he is likely to "overshoot" the
target based on that. The secondary distance display (compensated for the angle) reads 23
yards. That is the distance the hunter should base his shot upon.
CLEANING AND GENERAL CARE
The lenses of your Simmons Venture laser rangefinder are multi-coated for highest light transmission. As with any
multi-coated optics, special care must be taken in cleaning the lenses. Follow these tips for proper lens cleaning:
• Blow away any dust or debris on the lens (or use a soft lens brush).
• To remove dirt or finger prints, clean with a micro-fiber cloth rubbing in a circular motion. Use of a coarse cloth
or unnecessary rubbing may scratch the lens surface and eventually cause permanent damage. The included
washable microfiber cleaning cloth is ideal for the routine cleaning of your optics. Simply breathe lightly on the
lens to provide a slight amount of moisture, then gently rub the lens with the microfiber cloth.
• For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning fluid or isopropyl
alcohol may be used. Always apply the fluid to the cleaning cloth – never directly on the lens.
The rangefinder is manufactured and tested to withstand water exposure up to IPX4 standards. It is water resistant,
but should not be submerged.
4
Simmons_VentureLRF_FullManual_5LIM_ResizedForBox.indd 4
o
7/2/19 3:25 PM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Venture svl620bVenture svl620bt

Tabla de contenido